SPECTRUM QS
The SPECTRUM QS PECU is very convenient for walls or any other flat surface mounting. No additional junction boxes, strip connectors, or brackets are needed. Six side inlets and one rear inlet ensure installation versatility. Side inlets are available in either 25mm non threaded or M20 threaded inlet with re-insertable knock-outs.
QS10
QS15
- Operating Voltage: 230 VAC ±20%
- Operating Temperature: -35 ºC to +70 ºC
- Light Sensitive Element: Solid-state Phototransistor
- Contact Operation: Electromagnetic Relay
- Relay Approvals: UL & CSA
- Standard Time Delay: 20 seconds (±20%)
- Standard Switch ON LUX Level: 60 LUX (±10%)
- Standard Switch OFF LUX Level: 60 LUX (±10%)
- PCB Assembly ISO 9000: YES
- MOV Surge Protection: YES
- Enclosure Cover Material: ASA Housing Polycarbonate Lens
- Fully Weatherproof: IP68
- Guarantee: 5 Years
- Contact Rating 230 VAC Resistive: 10 Amp
- Contact Configuration (Normally): Closed
- Switching Ratio On: Off (±10%): 1:1
- Power Consumption: > 1 Watt
- Resistive Load (Watt): 2000
- Australian C-Tick: YES
- Operating Voltage: 230 VAC ±20%
- Operating Temperature: -35 ºC to +70 ºC
- Light Sensitive Element: Solid-state Phototransistor
- Contact Operation: Electromagnetic Relay
- Relay Approvals: UL & CSA
- Standard Time Delay: 20 seconds (±20%)
- Standard Switch ON LUX Level: 60 LUX (±10%)
- Standard Switch OFF LUX Level: 60 LUX (±10%)
- PCB Assembly ISO 9000: YES
- MOV Surge Protection: YES
- Enclosure Cover Material: ASA Housing Polycarbonate Lens
- Fully Weatherproof: IP68
- Guarantee: 5 Years
- Contact Rating 230 VAC Resistive: 15 Amp
- Contact Configuration (Normally): Closed
- Switching Ratio On: Off (±10%): 1:1
- Power Consumption: > 1 Watt
- Resistive Load (Watt): 3000
- Australian C-Tick: YES